Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 211)

-211-
Switch# configure terminal
Switch (config)# ip route 192.168.1.0 255.255.255.0 192.168.0.1
4.2.88 ip routing
Command:
ip routing
ip Internet Protocol
routing
Enable routing for IPv4 and IPv6
Default:
None
Usage Guide:
To enable IP routing
Example:
To enable IP routing
Switch# configure terminal
Switch (config)# ip routing
4.2.89 ip source binding interface
Command:
ip source binding interface 10GigabitEthernet | GigabitEthernet <port_type_id>
<ipv4_ucast> <ipv4_netmask>
ip Internet Protocol
source
source command
binding
ip source binding
interface
ip source binding entry interface config
<ipv4_ucast>
Select an IP Address to configure
<ipv4_netmask>
Select a subnet mask to configure