Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 80)

-80-
4.2.47 erps <1-64> sub
Command:
erps <1-64> sub port0 interface {10GigabitEthernet, GigabitEthernet} <PORT0_ID>
{ { port0 interface {10GigabitEthernet, GigabitEthernet} <PORT1_ID> }, {interconnect
<major_ring_id: 1-64> [ virtual-channel ] } }
<1-64>
ERPS group number
interconnect
Sub ring is interconnected
<major_ring_id: 1-64>
Major ring group number
virtual-channel
Enable virtual channel for sub-ring
Default:
0
Usage Guide:
To create a profile and configure the Sub ERPS interface port 0, port 1.
Example 1:
To create a profile 3 and configure the Sub ERPS interface port 0(GigabitEthernet 1/5), port 1(GigabitEthernet 1/6)
without interconnected mode and Major RIng group and virtual-channel
Switch# configure terminal
Switch (con fig)# erps 3 sub port0 interface GigabitEthernet 1/5 port1 interface
GigabitEthernet 1/6
Example 2:
To create a profile 2 and configure the Sub ERPS interface port 0(GigabitEthernet 1/3), port 1(GigabitEthernet 1/4) with
interconnected mode
and Major RIng group 1 and virtual-channel
Switch# configure terminal
Switch (config)# erps 1 sub port0 interface GigabitEthernet 1/3 interconnect 1
virtual-channel
4.2.48 erps <1-64> topology-change propagate
Command:
erps <1-64> topology-change propagate
<1-64>
ERPS group number
topology-change
Topology Change
propagate
Propagate