Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 354)

-354-
4.21.12 show eps
Command:
show eps [ <inst> ] [ detail ]
show
Show running system information
eps
Ethernet Protection Switching
<Inst : range_list>
The range of EPS instances
detail
Show detailed state including configuration information
Default:
N/A
Usage Guide:
To display the EPS instance information.
Example:
To display the EPS instance 1 detailed information.
Switch # show eps 1 detail
EPS state is:
Inst State Wstate Pstate TxAps r b
1 Disable Ok Ok NR 0 0
RxAps r b FopPm FopCm FopNr FopNoAps
NR 0 0 False False False False
EPS Configuration is:
Inst Dom Archi Wflow Pflow Wmep Pmep
1 Port 1plus1 1 2 3 4
APSmep Direct Revert Wtr Hold Aps
5 xxx xxx xxx xxx xxx