Interlogix Concord 4 REV J Installation Manual - Manual (Page 66)

Chapter 3: Programming
60 Concord 4 Installation Manual
Touchpad options menu
Touchpad options - global settings
Latchkey zones
Shortcut: 0500
Default: None
This setting defines the range of keyfobs that will function as latchkey
users (1 to 96). The value you enter in this section may be any valid
zone number. When you enter a zone number, all zones at or below that
zone number function as latchkey users. For example, if you enter 5,
any keyfobs learned into zones 1 to 5 will be latchkey users and all
others (6 to 96) will not.
To delete or disable latchkey zones, with the display showing
LATCHKEY ZONES nnn
(current setting), press D.
Touchpad options - partition 1 to 6 settings
Fire panic
Shortcut: 0510 to 0560
Default: On
This setting determines whether touchpad fire panic buttons are enabled
(on) or disabled (off).
Auxiliary panic
Shortcut: 0511 to 0561
Default: On
This setting determines whether touchpad auxiliary panic buttons are
enabled (on) or disabled (off).
Police panic
Shortcut: 0512 to 0562
Default: On
This setting determines whether touchpad police panic buttons are
enabled (on) or disabled (off).
Keyfob (keychain TP)
arm
Shortcut: 0513 to 0563
Default: Off
When this setting is on, pressing the Lock button on keyfob arms the
system directly to away with no delay. When this setting is off, each key
press increments the arming level (for example, from off to stay, from
stay to away).
Star is no delay
Shortcut: 0514 to 0564
Default: Off
This setting determines whether the keyfob Star button controls an
output (off) or the no delay feature (on).