Attach schedules to events menu – Interlogix Concord 4 REV J Installation Manual User Manual
Page 96
Chapter 3: Programming
90
Concord 4 Installation Manual
Attach schedules to events menu
This section describes how to link the system events to time schedules.
Latchkey reports
Shortcut:
060nn (opening),
061nn (closing), where
nn is schedule number
Default: Off
This setting lets you attach the latchkey opening report feature and the
latchkey closing report feature to time schedules.
To attach a schedule to latchkey opening or latchkey closing:
1. Press A
or B
until the display shows
ATTACH SCHEDULES TO
EVENTS
.
2. Press #
then A
or B
until the display shows
LATCHKEY OPENING
or LATCHKEY CLOSING
.
3. Press #
and the display shows
SCHEDULE 00 OFF/ON
(current
setting). If you want a different schedule, press A
or B
until the desired
schedule appears.
4. Press 1
(off) or 2 (on). The display flashes the entered selection.
Press # and the display shows the new setting for the selected
schedule.
Exception reports
Shortcut:
062nn (opening),
063nn (closing), where
nn is schedule number
Default: Off
This setting lets you attach the exception opening report feature and the
exception closing report feature to time schedules.
To attach a schedule to exception opening or exception closing:
1. Press A
or B
until the display shows
ATTACH SCHEDULES TO
EVENTS
.
2. Press #
then A
or B
until the display shows
EXCEPTION
OPENING OR EXCEPTION CLOSING
.
3. Press #
and the display shows
SCHEDULE 00 OFF/ON
(current
setting). If you want a different schedule, press A
or B
until the schedule
appears.
4. Press 1
(off) or 2
(on). The display flashes the entered selection.
Press #
and the display shows the new setting for the selected
schedule.