Interlogix Concord 4 REV J Installation Manual - Manual (Page 89)

Chapter 3: Programming
Concord 4 Installation Manual 83
Away Schedule 00 to 15 [Off]
Energy saver Low setpoint 45 to 89

[50]
High setpoint 48 to 90

[90]
Exit programming
System version Factory code
System number
System level
SW version
Time and date menu
The panel uses a global clock and calendar for time and date. This menu lets you
set this clock and calendar. Alphanumeric touchpads display the panel time and
date whenever the system is disarmed.
Note: Setting the time and date is important for accurate tracking of system
events stored in the event buffer.
Time
Shortcut: 020
Default: 00:00
This setting lets you adjust the panel clock to the correct time. The panel
uses a 24-hour clock (HH:MM). For example, to set the time to 4:17
p.m., enter 1617.
Date
Shortcut: 021
Default: 01/01/00
This setting lets you adjust the panel calendar to the correct month, day,
and year. Enter the correct month (01 to 12), day (01 to 31), and year
(00 to 99). For example, enter 090107 for September 1, 2007.