SINGER 8019 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
6. Draw thread firmly between left tension
disc
c
and tension separator
d,
then down
around thread guide
e
on front of machine.
( Presser foot must be raised to allow
thread to enter discs.)
7. Thread take-up lever
f
by guiding thread
through slot
g
and into eyelet
h.
8. Lead thread from take-up lever down to
lower thread guides I. as shown, and
thread needle from front to back. Draw
10cm (4") of thread through needle eye j.
10
Advertising