SINGER 8019 - Manual (Page 41)

buttons
III
• Pattern Group: ijjlill Yellow
• Stitch Width: To suit button
• Needle Position:
[jJ JL
• Button Foot
• Snap-In Feed Cover
Flat buttons can be sewn on quickly and easi ly
using the plain zig-zag stitch.
The space between the holes In the button
determines stitch width settings.
• Attach snap-in feed cover to zig-zag needle
plate.
1. Set stitch width at | and needle position
selector at . Position button under foot
and lower the needle Into the center of the
left hole. Lower the foot. Turn hand wheel
toward you until needle rises out of button
and is above the foot.
2. Move stitch width selector until needle is
over the other hole in the button. Continue
turning hand wheel until the needle is
above right hole, adjust stitch width, as
necessary, until needle enters center of
the right hole. Take six or more zig-zag
stitches and finish with the needle on the
left side.
3. To fasten stitching, adjust stitch width to
i and take three or four stitches.
I
• Remove work, draw threads to underside of
fabric, fasten, and trim.
39