Changing the needle – SINGER 8019 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Changing The Needle

1. Raise the needle to its highest position by

turning the hand wheel

toward you.

2. Loosen the needle-clamp screw A and

remove needle.

3. Insert new needle in clamp B

with the flat



of the needle to the back;

push it up

as far as it will go.

4. Tighten the needle-clamp screw.

This manual is related to the following products: