Labconco Protector ClassMate Laboratory Hoods 69716 - Manual (Page 46)

42
Product Service 1-800-522-7658
Chapter 5: Using Your Protector ClassMate Fume Hood
• Avoid using techniques or procedures that
disrupt the airflow patterns of the hood.
Final Purging
• Upon completion of work, the hood should be
allowed to operate for two to three minutes
undisturbed, to purge airborne contaminants
from the work area.
Unloading Materials and Equipment
• Objects in contact with contaminated material
should be surface decontaminated before
removal from the hood.
• All open trays or containers should be covered
before being removed from the hood.
Wipe-Down
• If dirty, wipe down the interior surfaces of the
hood with dish soap and glass cleaner and allow
to dry.
• Dispose of rubber gloves appropriately, and
have lab coat laundered properly.
• Wash hands and arms thoroughly with
germicidal soap.
Shutdown
• Turn off the fluorescent light and hood blower,
then close the sash.
Your Next Step
After you understand how to operate and work in the
fume hood, you are ready to proceed to Chapter 6:
Maintaining Your Protector ClassMate Fume Hood.