Labconco Protector ClassMate Laboratory Hoods 69716 User Manual
Page 78
Advertising
74
Product Service 1-800-522-7658
Appendix C: Protector ClassMate Specifications
• Transient over-voltages according to Installation
Categories II (Over-voltage Categories per IEC
1010). Temporary voltage spikes on the AC
input line that may be as high as 1500V for
115V models and 2500V for 230V models are
allowed.
• Used in an environment of Pollution degrees 2
(i.e., where normally only non-conductive
atmospheres are present). Occasionally,
however, a temporary conductivity caused by
condensation must be expected, in accordance
with IEC 664.
Advertising
This manual is related to the following products: