Labconco Protector ClassMate Laboratory Hoods 69716 - Manual (Page 84)

80
Product Service 1-800-522-7658
Appendix D: Protector ClassMate Accessories
Ductwork and Accessories
Labconco supplies a full line of ductwork, couplings,
elbows, dampers, T-connectors, Y-connectors,
reducers, and zero pressure weather caps. Consult
Labconco Sales Engineering Team to request the
blower brochure, which has the ductwork accessories or
if you need help with selection.
Service Fixtures
Your Protector ClassMate Fume Hood is equipped to
mount up to four service fixtures, two per side. The
service fixtures include serrated hose connector, valve,
fittings, and outlet plumbing. Supply tubing ordered
separately as shown below:
Catalog # Qty Description
4889900
1 5.5' Copper Tubing 1/4" O.D.
4921100 1 5.5' Brass Tubing (GAS) 1/4" O.D.
See Chapter 7 “Installing Additional Service Fixtures”
for specific part numbers.
Dual Exhaust Adapter for
Back to Back Hoods
The common exhaust adapter allows you to duct two
back-to-back Protector ClassMate Fume Hoods from
two 8" (8.62" O.D. pipe) exhaust stacks to one 12"
(12.00" O.D. pipe) exhaust stack.
Catalog #
Description
6987000 Dual Exhaust Adapter 8 x 8 x 12
Digital 335 Airflow Monitor
The digital airflow monitor with low flow alarm allows
you to continuously monitor face velocity through the
fume hood opening.
S A
S A
A S
S A