Distillation grids – field installation – Labconco Protector ClassMate Laboratory Hoods 69716 User Manual
Page 61
57
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector ClassMate Fume Hood
when the blower and light switches are turned
“ON”. (See Figure 7-6)
Step 15: The installation of the monitor is now
complete.
Step 16: Refer to the air monitor manual for calibration,
programming, and set-up.
Distillation Grids – Field
Installation
Location – Standard Mounting
The distillation grids P/N’s 6973300, 6973301, and
6973302 have been strategically placed with the
vertical rod center lines at a distance of 4" in front of
the lower baffle and middle baffle. The distillation
grids allow the hood user to mount motors, stirrers, and
other apparatus.
Description Model
No.
4' Hood Distillation Grid Kit
6973300
5' Hood Distillation Grid Kit
6973301
6' Hood Distillation Grid Kit
6973302
Figure 7-6
115V Outlet Cover