Labconco Protector ClassMate Laboratory Hoods 69716 - Manual (Page 16)

12
Product Service 1-800-522-7658
Chapter 3: Getting Started
people and follow safe-lifting
guidelines. Normally, the fume hood
can slide off a hydraulic lift and be
placed into position on top of the work
surface.
Unpacking Your Laboratory
Fume Hood
Carefully remove the shrink-wrap on your fume hood
and inspect it for damage that may have occurred in
transit. If your unit is damaged, notify the delivery
carrier immediately and retain the entire shipment intact
for inspection by the carrier.
DO NOT RETURN GOODS
WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO.
UNAUTHORIZED RETURNS WILL
NOT BE ACCEPTED.
IF YOUR HOOD WAS DAMAGED IN
TRANSIT, YOU MUST FILE A
CLAIM DIRECTLY WITH THE
FREIGHT CARRIER. LABCONCO
CORPORATION AND ITS DEALERS
ARE NOT RESPONSIBLE FOR
SHIPPING DAMAGES.
Do not discard the shipping skid or packing material for
your fume hood until you have checked all of the
components and installed and tested the unit.
Do not remove the fume hood from its shipping skid
until it is ready to be placed into its final location.
Move the unit by placing a flat, low dolly under the
shipping skid, or by using a floor jack.
Do not move the hood by tilting it onto
a hand truck.
The United States
Interstate Commerce
Commission rules
require that claims be
filed with the delivery
carrier within fifteen (15)
days of delivery.
!
)