Installing a 115v electrical duplex outlet – Labconco Protector ClassMate Laboratory Hoods 69716 User Manual
Page 64
Advertising
60
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector ClassMate Fume Hood
Installing a 115V Electrical
Duplex Outlet
Your Protector ClassMate Fume Hood can be ordered
with duplex outlets, however, if you ordered a model
without a 115V electrical duplex outlet you can have
one installed in the field by a qualified electrician.
Order the following parts from Labconco to field install
a 115V electrical duplex outlet assembly.
Parts Required:
Qty Part
No.
Description
1 ea.
6982400
Outlet Harness 115V, 15A
1 ea.
1885608
Screw, #6-32 x .50 Type F oval head black
1 ea.
1230700
Receptacle, Duplex 115V, 15A Gray
1 ea.
4922401
Wallplate, Duplex Receptacle Gray
2 ea.
1220300
Cable Connector
Figure 7-9
Advertising
This manual is related to the following products: