Altera Quartus II Settings File - Manual (Page 228)

HARDCOPYII_POWER_ON_EXTRA_DELAY
Directs HardCopy chip to wait before INIT_DONE pin goes high and before the chip is in user mode.
Type
Enumeration
Values
• Off
• Wait 1 ms
• Wait 2 ms
• Wait 4 ms
• Wait 50 ms
• Wait 8 ms
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name HARDCOPYII_POWER_ON_EXTRA_DELAY <value>
Default Value
Off
228 HARDCOPYII_POWER_ON_EXTRA_DELAY
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback