Altera Quartus II Settings File - Manual (Page 240)

RELEASE_CLEARS_BEFORE_TRI_STATES
Directs the device to release the clear signal on registered logic cells and I/O cells before releasing the
output enable override on tri-state buffers. If this option is turned off, the output enable signals are
released before the clear overrides are released.
Old Name
Release clears before tri-states
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name RELEASE_CLEARS_BEFORE_TRI_STATES <value>
Default Value
Off
240 RELEASE_CLEARS_BEFORE_TRI_STATES
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback