Memory_interface_data_pin_group – Altera Quartus II Settings File User Manual
Page 640
MEMORY_INTERFACE_DATA_PIN_GROUP
Specifies the group width (4, 9, 18, or 36), and associates a pin with another pin. Turning on this option
allows the Fitter to view the pins as part of the same memory interface pin group. I/O pins of this pin
group must be placed in the DQ pin locations of a single DQS group. This option is ignored if is assigned
to anything other than an I/O pad, input buffer, or output buffer.
Type
Integer
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name MEMORY_INTERFACE_DATA_PIN_GROUP -from <from> -
to <to> -entity <entity name> <value>
Example
set_instance_assignment -name MEMORY_INTERFACE_DATA_PIN_GROUP 4 -from
mem_clk[0] -to mem_clk_n[0]
See Also
DQSB_DQS_PAIR DQ_GROUP
640
MEMORY_INTERFACE_DATA_PIN_GROUP
MNL-Q21005
2015.05.04
Altera Corporation
Quartus Settings File Reference Manual