Altera Quartus II Settings File - Manual (Page 528)

ENABLE_CRC_ERROR_PIN
Specifies error detection CRC and CRC_ERROR pin usage for the selected device. If error detection CRC
is turned on, the device checks the validity of the programming data in the device. Any changes in the
data while the device is in operation generates an error.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name ENABLE_CRC_ERROR_PIN <value>
Default Value
Off
Example
set_global_assignment -name ENABLE_CRC_ERROR_PIN ON
See Also
ERROR_CHECK_FREQUENCY_DIVISOR CRC_ERROR_OPEN_DRAIN
528 ENABLE_CRC_ERROR_PIN
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback