KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 27)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 27 of 88
9.1.2 Mounting Variations, Stacked
Warning
No matter which setup you use, you must always secure the array to prevent tipping and
falling. To ensure safety, you can either use the lying flying frame with the optional accessory
'outrigger' or secure the array – with or without the flying frame – with suitable anchoring
such as lashing straps.
We recommend using the optional accessory 'outrigger' that you can purchase from your
K&F dealer. They are easy to mount and reliably secure the standing array to prevent falling.
The simulation software CON:SEQUENZA+ must always verify the number of stacked speakers
(max. 7). It is generally prohibited to exceed the maximum number of 7 stacked speakers.
Before setup, make sure there is a stable and even surface.
The following illustrations show you the possible setup variations with the corresponding
chapters in which the working steps for the setup are explained.
see following chapter:
•
General Preparation
• Preparing SEQUENZA 5 Flying
Frame, Flown, page 36
• Mounting SEQUENZA 5 W to
SEQUENZA 5 Flying Frame, Stacked,
page 53
• Mounting SEQUENZA 5 W to
SEQUENZA 5 W, Flown, page 36
see following chapter:
•
General Preparation
• Preparing SEQUENZA 5 Flying
Frame, Flown, page 36
• Mounting SEQUENZA 5 B to Flying
Frame, page 30
• Mounting SEQUENZA 5 W to
SEQUENZA 5 B, Flown
• Mounting SEQUENZA 5 W to
SEQUENZA 5 W, Page 57