KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 62)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 62 of 88
7b: Place a pipe clamp onto the
TV spigot.
8b: Lift the triple with an
approved hoist and hang it
from a suitable support.
The speakers are now
completely assembled and
secured.
You can now wire the speakers.
Detailed information for connecting the speakers and configuring the K&F system amplifier
TOPAS or the K&F SystemRack is in the hardware manuals.
10. Disassembly
Basically, you disassemble the array in the reverse order of assembly.
If you want to disassemble complete flown triples, you must proceed as follows:
1. Place a transport case
vertically – with its front lid
facing upward – under the
speaker array.
Open the front lid of the
transport case.
Slowly lower the bottom
three speakers of the array
into the transport case.