KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 61)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 61 of 88
6a:
Tip
We recommend first
assembling all elements
on the floor and
subsequently raising the
complete array with two
people.
If your configuration
provides for it, you can
mount up to two further
SEQUENZA 5 W speakers,
as described in chapter
'Safe Connecting and
Disconnecting of the
Products' on page 21.
Place the speaker stand on
an even and stable surface.
With two people, raise the
stand to the desired height,
tighten and secure it.
Tighten the clamping screw.
7a: Place the speaker with the VariMount adapter onto the speaker stand and
tighten the clamping screw.
8a: You may only stack a
maximum of three speakers
on a stand using the
VariMount adapter.
The speakers are now
completely assembled and
secured.
You can now wire the speakers.
Detailed information for connecting the speakers and configuring the K&F system amplifier
TOPAS or the K&F SystemRack is in the hardware manuals.
Pipe clamp alternative:
6b: If your configuration provides for it, you can mount up to two further
SEQUENZA 5 W speakers, as described in chapter 'Safe Connecting and
Disconnecting of the Products' on page 21.