KLING & FREITAG K&F SEQUENZA 5 W User Manual
Page 52
User's manual
K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015
Version 4.1
Page 52 of 88
9.5.2
Mounting SEQUENZA 5 B to SEQUENZA 5 Flying Frame,
Stacked
1.
Connect the speaker with
the flying frame as described
in chapter 'Safe Connecting
and Disconnecting of the
Products' on page 21.
2.
If the array is set up on a stage edge and tilted downwards, then the
SEQUENZA 5 B speakers must also be tilted accordingly.
Tilt angle (downtilt):
Depending on the configuration, you can set three different tilt angles.
•
If the speakers are standing at foot level, they don’t require any tilt angle.
Read step 2a for more.
•
If the speakers are standing slightly higher, you can use a 5° downtilt. Read
step 2b for more.
•
If the speakers are standing higher, you can use a 10° downtilt. Read step 2c
for more.
2a:
During setup, be sure to
use the short side of the L-
bracket on the speaker for a
0° angle.
Align the L-bracket so that
you can insert the ball lock
pin.
Attach and secure the L-
bracket with a ball lock pin.
Make sure that the L-
bracket has a slightly
sloped position.