KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 32)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 32 of 88
9.3.2.1 Installation of a Load Adapter
Take the load adapter (1) out of its park position and place it onto the drill hole on the
flying frame, as determined by the simulation software CON:SEQUENZA+.
With a two-strand rigging, proceed with the second load adapter accordingly.
Make sure the load adapter is correctly aligned.
Warning
Always fasten the load adapter with two ball lock pins (2).