KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 59)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 59 of 88
5. The complete standing
SEQUENZA 5 speaker array is
now set up and the speakers
are secured among each
other.
Warning
Please note that without
outriggers on the rigging
frame, the array must be
secured from tripping
and falling with suitable
lashing straps.
With outriggers on the
rigging frame, you must
ensure that no one can
trip over the outriggers. If
the array cannot stand in
a secured area, block the
area around the array.
9.5.7 Mounting SEQUENZA 5 W to SEQUENZA 5 Varimount
Adapter
In the following steps, the handling of the VariMount adapter will be shown.
The VariMount adapter can be used for stand mounting as well as flown mounting. Flown
mounting requires the TV spigot and the appropriate accessories.
Warning
Please note that the SEQUENZA 5 VariMount adapter is designed for a maximum of three
SEQUENZA 5 W speakers. Make sure that the stand is designed for the total weight.
You can find out about further setup alternatives in chapter 'Setup Variations' from page 24.
In the following description, only a stand adapter is shown. All work on the speakers up to
the final mounting or flying is identical.
1. If you wish to mount
a maximum of three
SEQUENZA 5 W speakers,
you can decide between
the alternatives of a stand
positioned on the ground or
a hanging TV spigot.
Either screw in the stand
adapter or the TV spigot.
2.
Caution
Ensure that the adapter is always positioned precisely horizontal.
To ensure safe use, the array's centre of gravity must always be vertically
in line with the TV spigot.