KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 33)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 33 of 88
Make sure the load adapters (1) and the two ball lock pins (2) are secured in place.
9.3.2.2 Installing the TV Spigot
Remove the TV spigot (1) from its park position and place it on the drill hole on the
flying frame, as determined by the simulation software CON:SEQUENZA+.
To do so, select a one-stranded suspension in the software.
Warning
Always fasten the TV spigot with two ball lock pins.
Keep in mind the safe maximum load for the TV spigot is limited to 116 kg (BGV C1 /
Factor of Safety 10:1). (e.g. 6 SEQUENZA 5-tops)