KLING & FREITAG K&F SEQUENZA 5 W User Manual
Page 43
Advertising
User's manual
K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015
Version 4.1
Page 43 of 88
7.
Compare the drill hole
to which the connector is
attached with the print-out
of the simulation.
Correct the position if
necessary:
Pull the spring bolt outwards
as far as it will go (release
position), hold onto it, and
fold the connector out. (see
chapter 'Using the Spring
Bolt' on page 20)
Position the connector in
the calculated tilt angle drill
hole.
Attach the connector with
the removed ball lock pin.
8.
The speakers are now completely assembled and secured.
If you don't want to mount any more speakers, then you can now wire the speakers.
Advertising