KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 46)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 46 of 88
7. The speaker is now
completely assembled and
secured.
Connect the SEQUENZA 5
flying frame with the
SEQUENZA 5 W speaker
as explained in chapter
'Safe Connecting and
Disconnecting of the
Products' on page 21.
If you don't want to mount any more speakers, then you can now wire the speakers.
Further information in chapter 'Wiring' on page 65.
Detailed information for connecting the speakers and configuring the K&F system amplifier
TOPAS or the K&F SystemRack is in the hardware manuals.
Read more in chapter 'Lifting the Array' on page 48.
9.3.8 Mounting SEQUENZA 5 W and SEQUENZA 10 with Downfill
Adapter
Using the downfill adapter, you may hang a maximum of three speakers under a SEQUENZA
10 N/W speaker. You must always check the structural calculations with the simulation
software CON:SEQUENZA+.
With the downfill adapter, you create a stable and safe connection between a SEQUENZA 10
N/W speaker and a SEQUENZA 5 W speaker.
1. Connect the SEQUENZA 5
downfill adapter with the
SEQUENZA 5 W speaker,
as described in chapter
'Safe Connecting and
Disconnecting of the
Products' on page 21.