KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 51)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 51 of 88
9.5.1 Preparing the Flying Frame
1. To compensate for minimal
ground unevenness, you
can adjust the integrated
rubber padded feet by a few
centimetres. This prevents
the mounted flying frame
from sliding and/or causing
damaging scratches to the
floor.
2. Lay the flying frame on
the floor and align it
horizontally using the built-
in spirit level.
3. Optional:
Place one outrigger on each
corner of the flying frame.
You must adjust all feet
on the flying frame and
outrigger so that they are all
on the ground.
Caution
To avoid damaging the
material, the adjustable
feet of the flying
frame must always
be completely on the
ground. They must bear
the entire load of the
array.