Settings – evu editor – Fronius Energy Package User Manual
Page 101
99
EN
Settings – EVU Editor
General remarks
Use the “EVU Editor” menu item to make the settings that are of relevance to a utility com-
pany.
You can set an effective power limit in % and/or a power factor limit.
IMPORTANT! Settings under the “EVU Editor” menu item are only to be made by trained
and qualified personnel!
The service password must be entered in order to access the “EVU Editor” menu item.
EVU Editor – Rip-
ple control signal
receiver
EVU Editor – The factory settings for effective power are 100%, 60%, 30% and 0%.
The settings can be changed at any time.
(1)
Rule activation
(2)
Input pattern (assignment of individual I/Os)
1 click = white
2 clicks = blue
3 x clicks = grey
(3)
Effective power
Activate it first and then enter the required effective power value in %.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(10)
(8)
(9)
(12)
(11)