Installing fronius system monitoring – overview – Fronius Energy Package User Manual

Page 60

Advertising
background image

58

Installing Fronius system monitoring – Overview

Safety

Using for the first
time

IMPORTANT! In order to establish a connection to Fronius system monitoring, the end de-
vice in question (e.g. laptop, tablet, etc.) must be set up as follows:
-

“Obtain IP address automatically (DHCP)” must be activated.

Switch the device to Service mode.
-

Activate the WIFI access point via the Setup menu on the inverter.

The inverter establishes the WLAN access point. The WLAN access point remains open
for 1 hour.

WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
-

these operating instructions

-

all the operating instructions for the system components, especially the safe-
ty rules

NOTE! Knowledge of networking systems is required in order to install Fronius
system monitoring.

NOTE! The Fronius Solar.web App makes it much easier to set up Fronius sys-
tem monitoring when using it for the first time.
The Fronius Solar.web App is available in the relevant App store.

Alternatively,
„https://wizard.solarweb.comvisit “https://wizard.solarweb.com”.

1

Relay

Standby

WiFi Access Point

Relay
Clock
Display Setting

Advertising