Gasboy Fuel Point PLUS Station - Manual (Page 122)

SAFETY CONSIDERATIONS
These instructions are important to the safe use of the product. Please read these instructions carefully and retain these instructions.
Read all warning notes and instructions carefully. They are included to help you installing the Product safely in the highly flammable environment of the fuel
station. Disregarding these warning notes and instructions could result in serious injury or property damage. It is the installer responsibility to install, operate
and maintain the equipment according to the instructions given in this manual, and to conform to all applicable codes, regulations and safety measures. Failure
to do so could void all warranties associated with this equipment.
Remember that the fuel station environment is highly flammable and combustible. Therefore, make sure that actual installation is performed by experienced
personnel, licensed to perform work in fuel station and at a flammable environment, according to the local regulations and relevant standards.
WARNING – EXPLOSION HAZARD
Use standard test equipment only in the non- hazardous area of the fuel station, and approved test equipment for the hazardous areas of sufficient level.
In the installation and maintenance of the Product, comply with all applicable requirements of the National Fire Protection Association NFPA-30 “Flammable
and Combustible Liquids Code”, NFPA-30A “Automotive and Marine Service Station Code”, NFPA-70 “National Electric Code”, federal, state and local codes
and any other applicable safety codes and regulations.
Do not perform metal work in a hazardous area. Sparks generated by drilling, tapping and other metal work operations could ignite fuel vapors and flammable
liquids, resulting in death, serious personal injury, property loss and damage to you and other persons.
WARNING – PASSING VEHICLES
When working in any open area of fuel station, beware of passing vehicles that could hit you. Block off the work area to protect yourself and other persons. Use
safety cones or other signaling devices.
WARNING
Components substitutions could impair intrinsic safety.
Attaching unauthorized components or equipment will void your warranties.
CAUTION
Do not attempt to make any repair on the printed circuit boards residing in the Product, as this will void all warranties related to this equipment.