Chapter 7 programming wnr units, General, Required tools – Gasboy Fuel Point PLUS Station User Manual
Page 87: Programming wnr units
Advertising
Fuel Point PLUS Station Equipment Manual
87
CHAPTER 7 PROGRAMMING WNR UNITS
7.1. General
This chapter provides instructions for programming µWNR units
To program the µWNR units, you simply need to set three parameters:
Station ID
Pump #
Nozzle #
Note: Station ID, Pump# and Nozzle# must mach the settings done in Master Wireless
Gateway. See
7.2. Required Tools
To program µWNR units you may use one of the following tools:
Wireless Nozzle Reader Programmer, for retail stations (see
Advertising