Fill the power supply with coolant b-22, Fill the power supply with coolant – Hypertherm HD4070 Rev.8 User Manual
Page 109
Advertising
2-TORCH INSTALLATION
3B-22
HD4070
Instruction Manual
7
Fill the Power Supply with Coolant
4070.40A
Check that the drain valve is closed.
1
Add coolant to the power supply until
the sight gauge indicates full.
2
Replace the filler cap.
3
Caution
Use Hypertherm coolant (028872) to reduce the risk of damage from
freezing and to prevent long-term corrosion.
Advertising