Fill the power supply with coolant a-24, Fill the power supply with coolant – Hypertherm HD4070 Rev.8 User Manual
Page 86
Advertising
![background image](/files/789618/content/doc086.png)
1-TORCH INSTALLATION
7
3A-24
HD4070
Instruction Manual
Fill the Power Supply with Coolant
4070.40A
Check that the drain valve is closed.
1
Add coolant to the power supply until
the sight gauge indicates full.
2
Replace the filler cap.
3
Caution
Use Hypertherm coolant (028872) to reduce the risk of damage from
freezing and to prevent long-term corrosion.
Advertising