Hypertherm HD4070 Rev.8 - Manual (Page 171)

MAINTENANCE
5-24 HD4070 Instruction Manual
3
Breakout Board LED List
LED Signal Name Function
D5 THC1 Tx Transmits information to THC1
D6 THC2 Tx Transmits information to THC2
D7 THC1 Rx Receives information from THC1
D8 THC2 Rx Receives information from THC2
D9 Watchdog Illuminated when no errors are detected
D11 CNC Tx Transmits information to CNC
D12 Gas Tx Transmits information to gas console
D13 Display Tx Transmits information to touch screen display
D14 Display Rx Receives information from touch screen display
D15 CNC Rx Receives information from CNC
D16 Gas Rx Receives information from gas console
D17 –12 VDC Power indicator
D24 +12 VDC Power indicator
D25 +5 VDC Power indicator
LEDN2 Signal Name Function
LEDN2-1 Not Used —
LEDN2-2 Master door interlock All interlocks are engaged
LEDN2-3 Output current OK Power supply control has detected current from chopper
LEDN2-4 Temp / Airflow OK Transformer temperature is with-in normal operating range
LEDN2-5 Chopper #2 Temp OK Chopper 2 temperature is within normal operating range
LEDN2-6 Chopper #1 Temp OK Chopper 1 temperature is within normal operating range
LEDN2-7 Missing phase detect Indicates proper 3-phase line voltage
LEDN2-8 Input power active Indicates proper logic power on power supply control board
LEDN2-9 Not Used —
LEDN2-10 Not Used —
Breakout Board LEDN List
LEDN1 Signal Name Function
LEDN1-1 Not Used —
LEDN1-2 THC1 cable installed Checks for cable installation
LEDN1-3 THC1 IHS complete Contact with work-piece detected
LEDN1-4 THC1 retract complete THC1 is at home position
LEDN1-5 THC1 discrete error Indicates THC error
LEDN1-6 THC2 cable installed Checks for cable installation
LEDN1-7 THC2 IHS complete Contact with work-piece detected
LEDN1-8 THC2 retract complete THC2 is at home position
LEDN1-9 THC2 discrete error Indicates THC error
LEDN1-10 Not Used —