Hypertherm HD4070 Rev.8 - Manual (Page 36)

94 lb
42.7 kg
11.625"
295 mm
18.75"
476 mm
24.75"
629 mm
1/4-20
22.75" / 578 mm
17.0"
432 mm
4070.20A
SPECIFICATIONS
0
2-8 HD4070 Instruction Manual
Gas console assembly - 078085
Position the gas console near the cutting table. Allow room to open the top for servicing.
Venting air is drawn in through fans on both sides and is exhausted through the front of the unit.
Maximum distance from the power supply should not exceed 150 feet (46 m).
Maximum distance to the off-valve assembly should not exceed 100 feet (30.5 m).