Kanguru Optical Duplicator - Manual (Page 25)

25
After 2 to 5 seconds of processing time, the Test Progress screen will appear.
Testing... 4012MB
0 10% 401MB
Note: It is normal to see the progress indicator stay at 0-10%
and 100% for approximately 30 seconds to one minute for
duplication. That is caused by the initializing and finalizing
stages.
Once the Test process has been completed, the Copy process will automatically begin.
Copying... 4012MB
0 10% 401MB
5. Once the Copy process has been completed, you will see the following screen.
Pass 7 Fail 0 ( 7)
Waiting for Blanks
• PASS 7 - number of discs successfully copied.
• FAIL 0 - number of discs that failed to copy.
• ( 7 ) - number of copies made for this job so far.
The successful copies will be ejected. Remove the successful copies, refill the trays with blank media and
press the ENT button to continue making another round of copies. Any discs that fail to test or copy will
not be ejected automatically. You will need to manually eject them and throw them away if they are single
recording discs. Empty drives will also not be ejected automatically.
6. Terminate the current job.
a) If you have finished making copies, press the ESC button to terminate the current duplication
project and exit to the Main Menu.
b) If you specified a Counter, once you see the following screen indicating that the specified Counter
value has been reached, you can then press the ENT button to exit to the Main Menu.
Pass 21 Fail 0
Job Completed! Press ENT to Finish
Test & Copy