Kanguru Optical Duplicator - Manual (Page 63)

63
Error
Code
Error Message Description & Recommended Solutions
205
Targets Not
Blank!
Description:
The target (blank) discs are not detected and identified as either
RW/R discs or blank discs.
Possible Solution:
Please go to Disc Info in the Advanced Setup menu to make sure
the intended blank discs are empty (see section “3.13.14.1 Disc
Info” on page 44).
206
Targets & Master
Size Mismatch!
Description:
1. When the error code occurs during the Compare process,
the size of the master disc and the successfully copied disc(s)
is different. The Kanguru Duplicator can’t cross copy across
different media formats.
2. When the error code occurs during a Copy related process,
the capacity of the blank disc(s) is less than the data size of the
master disc.
Possible Solution:
1. When the error code occurs during the Compare process,
contact Tech Support.
2. When the error code occurs during a Copy related process,
please go to Disc Info in the Advanced Setup menu to make
sure the blank disc’s capacity is large enough to fit the data
size of the master disc (see section “3.13.14.1 Disc Info” on
page 44
207
Targets M Code
Mixed!
Description:
The blank discs contain different manufacture codes.
Possible Solution:
Please go to Disc Info in the Advanced Setup menu to make sure
every blank disc has the same media ID (M-Code) (see section
“3.13.14.1 Disc Info” on page 44).
Make sure all targets are from the same manufacturer and replace
the one(s) that are different if necessary.
208
Targets are not
RW discs!
Description:
The target(blank) discs are not Rewritable discs
Possible Solution:
Please go to Disc Info in the Advanced Setup menu to make sure
every blank disc is a rewriteable disc (see section “3.13.14.1 Disc
Info” on page 44).
Error Codes