Kanguru Optical Duplicator - Manual (Page 69)

69
7. Speed Mode - A Writer drive’s default burning strategy is often designed for a single drive environment,
which is not always suitable for a multiple drive writing environment like duplication. Therefore, we
include an internal burning strategy database in our controller that contains our latest complete up-
to-date media testing results specifically designed for the duplication environment. This strategy was
developed to complement the Writer drive’s default writing strategy. With this optimization, we are
able to achieve far better media writing quality compared to other Duplicator systems.
When the Speed Mode setting is set to Safe (default), the burning strategy optimization will be utilized
to ensure the best duplication quality. Changing this setting to Turbo will disable such optimization
and could affect the duplication capability.
8. Show Drive Mileage - When the Show Drive Mileage setting is set to On, you will be able to view
the total number of discs that were duplicated successfully and how many failed by a particular Writer
drive. The default value is set to On.
Note: A hard drive is required to be installed in order for this function to work.
9. Update Drives - The Update Drives function will allow you to perform the firmware update for
all Writer drives installed in the Duplicator at once. Traditionally you would need to disconnect
each Writer from the controller and then plug them into a PC one by one to perform the update. By
performing the Writer firmware update through the Duplicator, the update process can be done faster
and more conveniently.
Note: The Writer firmware update file/disc is required to perform this update (select models only).
10. External IO Support - When the External IO Support allows the Duplicator to be connected to
a computer via USB or Network connection (for more information please see section “3.15 USB/
External Connection” on page 51). This function is set to Enabled by default. Do not change this
setting. Doing so may prevent your Duplicator from being able to be connected to a computer.
11. CD+G Support - When the CD+G Support setting is set to ON, the Duplicator will support the
duplication of CD+G media. However, due to the lack of support of the CD+G format amongst most
Writer drives, the default setting is set to Off. Please confirm that the Writer drives can support the
CD+G format before changing the CD+G Support setting to On.
Appendix A: Advanced Setup Menu