Kanguru Optical Duplicator - Manual (Page 74)

74
5. Once MacFUSE has been installed, go back to the root directory and open the fuse-ext2 folder.
Double-click on fuse-ext2.pkg and follow the installer instructions to install MacFUSE.
Note: You may see the following message prior to installation. Please click continue to start the
installer.
6. Once fuse-ext2 has been installed, go back to the root directory and open the CopyConnect for
Mac(x86_64) folder and copy the CopyConnect for Mac application to the desktop.
Appendix C: CopyConnect for Mac