Kanguru Optical Duplicator - Manual (Page 39)

39
3.13.6 Max Audio, VCD & CDG Speed
The Max Audio, VCD & CDG Speed setting allows you to adjust the maximum duplication speed for Audio
and Video CDs. Audio CDs and video CDs do not have internal error checking capability, so duplicating at
too high of a speed may cause frequent errors.
You can set the Max Audio, VCD & CDG setting to 1x, 2x, 4x, 8x, 10x, 12x, 16x, 24x, 32x, 40x, 48x, 52x
and Max. When set to Max, audio and video CDs will be burned at the highest speed possible. The default
setting is 16x.
Setup
6. Max Audio, VCD & CDG
Max Audio, VCD & CDG
16x
1. From the Setup Menu, press the UP or DOWN button
to navigate to Max Audio, VCD & CDG Speed. Press
the ENT button to enter the Max Audio, VCD & CDG
Speed menu.
2. Press the UP or DOWN button to select the desired burn
speed. Press the ENT button to confirm your selection.
You will exit to the Setup Menu.
Note: If the speed value you’ve selected is the same as the current speed value, the system will NOT respond
to the ENT button. You will have to press the ESC button to return to the Max Audio, VCD & CDG menu.
3.13.7 Button Sound
The Button Sound setting allows you to choose whether or not you hear an audible beep signal when a
button is pressed or when a task has been completed. You can turn the Button Sound setting On or Off. The
default setting is On.
Setup
7. Button Sound
Button Sound
On
1. From the Setup Menu, press the UP or DOWN button
to navigate to Button Sound. Press the ENT button to
enter the Button Sound menu.
2. Press the UP or DOWN button to select On or Off.
Press the ENT button to confirm your selection. You will
return to the Setup Menu.
Max Audio, VCD & CDG Speed / Button Sound