Kanguru Optical Duplicator - Manual (Page 72)

72
Appendix C: Copy Connect for Mac (Hard Drive models only)
Like the Kanguru Media Manager, the CopyConnect software needs to be installed on your Mac in order for
it to recognize the Kanguru Duplicator’s hard drive through the USB connection.
The Kanguru Duplicator’s internal hard drive is formatted using a proprietary file system that is not recognized
by your Apple computer. Once you have installed the CopyConnect software on your Mac, your Mac will be
able to recognize the file system and you will be able to access the Duplicator’s internal hard drive, allowing
you to copy or save files directly from your computer to your Duplicator through the USB connection.
Minimum Hardware Requirements
√ Mac Computer (Mac OS X 10.5, 10.6 and 10.7 supported)
√ USB2.0 port
√ 10MB of free disc space on your hard drive
Software Installation
1. Download the installation DMG file to your desktop.
2. Double-click on the DMG file. You will prompted for a password to access the files. Enter the
CopyConnect Product Key and then click on OK to continue. The CopyConnect Product Key can be
found on a label attached to the back of the duplicator. The Product Key must be entered exactly as it
appears, including the dash. If you do not have a CopyConnect Product Key please contact Kanguru
Solutions.
3. Once you have entered the Product key, the DMG file is mounted and you can access the files within it.
Appendix C: CopyConnect for Mac