Rename partition – Kanguru Optical Duplicator User Manual
Page 55
55
3.16.3 Rename Partition
The Rename Partition function allows you to rename an existing partition/image on the hard drive.
Hard Drive Setup
3. Rename Partition
Choose Partition
[NEW-0001.VEF] 247M
Hard drive is empty
Press ENT to Continue
Rename Partition
[NEW-0002 ] OK?
[NEW-0002.VEF] 247M
Renamed!
1. From the Hard Drive Setup menu, press the UP or
DOWN button to navigate to Rename Partition. Press
the ENT button to enter the Rename Partition menu.
2. Press the UP or DOWN button to select a partition on
the hard drive. Press the ENT button to confirm your
selection.
Note: If you haven’t loaded a Master disc image onto
the hard drive, you will see the Hard drive is empty
screen. For more information on loading an image
on to the hard drive please see section “3.16.2 Load
3. The Rename Partition screen appears. Enter a new name
for the partition and confirm. For more information on
naming the partition, please see section “3.2.1 Entering
Names and Numbers” on page 11.
You will see the Renamed screen appear for 2 to 3
seconds and then you will be returned to the Hard Drive
Setup menu.
Rename Partition