LSC Lighting Redback Wallmount Operators Manual - Manual (Page 21)

Redback Wallmount Dimmer Menu System
Operator Manual V1.3
Page 17
Channels individually patched
Both displays also show a colour coded mini bar-graph of the dimmer output at the top of
the screen. See the “Dimmer Output” home page above for the colour code.
Pressing [1 to 1 Patch] allows you to easily patch all of the channels to sequential DMX
slots as described below.
Pressing [View Output] selects the “Dimmer Output” home page.
4.5.1 1 to 1 Patch
Patches are often performed in contiguous blocks of addresses. The 1 to 1 patch function
provides a rapid method of patching all of the dimmers in one Redback rack to sequential
DMX slots, starting from a DMX address that you enter.
To perform a 1 to 1 patch, select the “DMX Address” home page (above) then press [1 to 1
Patch].
Enter the DMX address for the first channel in this Redback then press [Apply].
Individual channel patching is performed in the DMX menu as described below.
4.6 CONFIG MENU
From any of the “Home Pages”, pressing [Config] reveals the “Configuration Menu”.
The buttons on the “Configuration Menu” provide access to the Sub-Menus and functions
which are described in detail on the following pages. Each sub menu has its name at the top
of its screen.
The following table shows the functions that can be performed in each sub menu.
Dimmer
output
DMX address of
every dimmer
channel