LSC Lighting Redback Wallmount Operators Manual - Manual (Page 35)

Redback Wallmount Dimmer Menu System
Operator Manual V1.3
Page 31
.
4.12.2.1 Restart Dimmer
In the unlikely event that the Redback fails to respond, the operating system may be
restarted so that the software may initialise and recommence normal operation. Performing
a restart will not affect any of the settings or memory.
4.12.2.2 RESET To Defaults
This will ERASE all memory from the Redback and reset to defaults.
4.12.3 Code Upgrade
See section 10 for details.
4.13 LOCK / UNLOCK
To lock the touch screen of the Redback and prevent unauthorised access press [Config].
Pressing the “Padlock” symbol provides 3 levels of lock.
 User. Locks out the “Config”, “Riggers Control” and “1 to 1 Patch” menus.
 Config. Locks out the “Config” menus.
 System. Locks out the “System” menu.
Note: The “System” menu is used for factory setup and has no user functions. It is always
locked.
Pressing a [Lock] button reveals a “Lock” keypad. Enter a four digit code and the [Lock]
button appears.
Lock/Unlock