LSC Lighting Redback Wallmount Operators Manual - Manual (Page 33)

Redback Wallmount Dimmer Menu System
Operator Manual V1.3
Page 29
Touch a channel to select it. You can select multiple channels. To select a range of channels
select your first channel then press [Thru] then your last channel. Use [All] to select all
channels. Press [None] to de-select all channels.
When you have selected your channel(s) press [Level].
Use the keypad to set the level then press [Apply].
4.10.2 Taking a Snapshot
To create a “Panic” memory by taking a snapshot, press [Snap] from the “Panic Memory”
menu above.
Pressing [DMX] will take a snapshot of the current DMX input signal.
Pressing [Outputs] will take a snapshot of the current output of the Redback. These
channel levels could be coming from DMX, Memories, Riggers Control or a combination of
all three.
When you take the snap, the channels levels will be displayed in the box below the memory
name.
To save the snapshot to the memory press [Apply].
The channels levels that were captured in the snapshot can be edited by manually setting
channel levels as described above.
4.10.3 Fade Time
When editing the Panic memory (above), you can set a fade time for the memory by
pressing [Fade].
Channel levels in
the snapshot