LSC Lighting Redback Wallmount Operators Manual - Manual (Page 46)

Software Upgrade Redback Wallmount Dimmer
Operator Manual V1.0
Page 42
10 Software Upgrade
LSC Lighting Systems has a corporate policy of continuous improvement to its products. The
Redback Wallmount dimmer software (firmware) is subject to this policy as new features are
added and existing features improved.
The software version of your Redback Wallmount dimmer can be checked by pressing
[Menu] [Options] [About].
To upgrade your Redback Wallmount software, download the latest version from the LSC
web site,
www.lsclighting.com , unzip it and save the new software to an SD Card. Both HC and
low density format cards are supported. The file will be called “RBW_V*.bin” where * is the
version number.
Press [Menu], [Setup], [Code Upgrade].
Remove the front connector or blanking panel and insert the SD card.
Follow the onscreen instructions.
SD card
slot.