LSC Lighting Redback Wallmount Operators Manual - Manual (Page 30)

Menu System Redback Wallmount Dimmer
Operator Manual V1.3
Page 26
To change the settings of a channel(s), select the channel(s) by touching. You can select
multiple channels. To select a range of channels select your first channel then press [Thru]
then your last channel. Use the [<] or [>] buttons to see the other groups of 6 channels (if
fitted). Use [All] to select all channels. Press [None] to de-select all channels.
The selected channels are highlighted in the navigator:
In this example channels 1 through 6 plus channel 20 are selected.
When you have selected your channel(s) press [Edit].
There are 4 possible parameter menus: Min Level, Max level, Curve and Source. Use the
[] and [] “Parameter Selector” buttons to scroll through the parameter settings for the
selected channel(s).
Min Level Max level
Curve Source
Channels fitted with “Switch Modules” only have the “NonDim” curve available.
Max =50%
Min = 5%
Curve = Non-Dim
Curve =Dim
Dimmer Channel 6
patched to DMX 105
Selected
Channel
Selected
Channels
Parameter
Selector
Parameter
Selector
Help
Selected
Parameter