Marantz AV8801 - Manual (Page 105)

102
Setup ( vpage 35 )
Playback (Basic operation) ( vpage 43 )
Selecting a listening mode (Sound Mode)
( vpage 86 )
n HDMI control function ( vpage 102 )
n InstaPrevue function ( vpage 104 )
n Sleep timer function ( vpage 105 )
n Web control function ( vpage 106 )
n Dual backup memory function ( vpage 108 )
n Panel lock function ( vpage 108 )
n Remote lock function ( vpage 109 )
n Switches light illumination on/off ( vpage 110 )
n Various memory functions ( vpage 110 )
Playback (Advanced operation)
HDMI control function
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
n Operations possible by HDMI control
• This unit power off can be linked to the TV power off step.
• You can switch audio output devices with a TV operation.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
• You can adjust this unit volume in the TV volume adjustment
operation.
• You can switch this unit input sources through linkage to TV
input switching.
• When playing the player, this unit input source switches to the
source for that player.
• If you switch the input source of the unit to “TV AUDIO”, you
can play TV audio with this unit ( vpage 10 “About ARC
(Audio Return Channel) function”).
• When “HDMI Control” ( vpage 128 ) in the menu is set to
“On”, signals input to the HDMI input connector are output to
the television or other device connected to the HDMI output
connector, even if the power of this unit is in standby (pass-
through function).
To use this unit to play the audio of a TV that does not support the ARC
function, connect the TV with an optical-digital or analog connection
(
vpage 10 ).
n Setting procedure
1 Set the HDMI output connector corresponding with
the HDMI control function.
Set “HDMI Control” ( vpage 128 ) to “On”.
2 Turn the power on for all the devices connected by
HDMI cable.
3 Set the HDMI control function for all devices
connected by HDMI cable.
• Please consult the operating instructions for the connected devices
to check the settings.
• Carry out steps 2 and 3 should any of the devices be unplugged.
4 Switch the television input to the HDMI input
connected to this unit.
5 Switch this unit input to the HDMI input source and
check if the picture from the player is ok.
6 When you turn the TV’s power to standby, check
that the power of this unit also goes to standby.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
v See overleaf
DVD